• twitter
  • facebook
  • instagram
  • Youtube
  • GitHub
  • Box
  • Qiita
MENU

PUBLICATIONS

Satake, K., Okada, K., Muramatsu, M., “Phase-field Crack Analysis Using Estimated Transition Zone of Crack by Molecular Dynamics Simulation”, AIP Advances, Vol. 11, pp. 065206, 1-10, (2021).https://doi.org/10.1063/5.0054236

2024

  1. Kojima, Y., Hirayama, K., Harada, Y., Muramatsu, M., "Transfer-learning-aided Defect Prediction in Simply Shaped CFRP Specimens Based on Stress Distribution Obtained from Finite Element Analysis and Infrared Stress Measurement", Composites Part B, Vol. ??, pp. ??-??, (2024), Accepted.https://doi.org/10.1016/j.compositesb.2024.111958
  2. Suzuki, M., Shizawa, K., Muramatsu, M., "Deep learning-aided inverse analysis framework to accelerate the exploration of DP steel microstructures", Materials Today Communications, Vol. 41, pp. 110557 1-17, (2024). https://doi.org/10.1016/j.mtcomm.2024.110557
  3. Yamazaki, Y., Harandi, A., Muramatsu, M., Viardin, A., Apel, M., Brepols, T., Reese, S., Rezaei, S., “A finite element-based physics-informed operator learning framework for spatiotemporal partial differential equations on arbitrary domains”, Engineering with Computers, Vol. ??, pp. 1-29, (2024). https://doi.org/10.1007/s00366-024-02033-8
  4. Sato, M., Muramatsu, M., Tozato, K., Moriguchi, S., Kawada, T., Terada, K., "Surrogate modeling for transient electrochemical potential analysis for SOFC using proper orthogonal decomposition", Solid State Ionics, Vol. 414, pp. 116642, 1-34, (2024).https://doi.org/10.1016/j.ssi.2024.116642
  5. Honda, R., Endo, K., Kaji, T., Suzuki, Y., Matsuda, Y., Tanaka, S., Muramatsu, M., "Development of optimization method for truss structure by quantum annealing", Scientific Reports, Vol. 14, No. 13872, pp. 1-13, (2024).https://doi.org/10.1038/s41598-024-64588-2
  6. Endo, K., Matsuda, Y., Tanaka, S., Muramatsu, M., "Novel real number representations in Ising machines and performance evaluation: Combinatorial random number sum and constant division", PLOS ONE, Vol. 19, No. 6, pp. 1-19, (2024).https://doi.org/10.1371/journal.pone.0304594
  7. Kojima, Y., Hirayama, K., Harada, Y., Muramatsu, M., "Discussion on infrared stress measurements based on finite element analysis of transient heat conduction", Bulletin of the JSME, ID23-00571, pp. 1-12, (2024).https://doi.org/10.1299/mej.23-00571
  8. Terashima, Y.L., Brumby, P.E., Murashima, T., Kouznetsova, V., Muramatsu, M., "Fine-scale structural stability of carbon dioxide hydrate pellets under coarse-scale deformation using multi-scale coupled FEM-MD simulations", Materials Today Communications, Vol. 38, pp. 108322 1-12, (2024). https://doi.org/10.1016/j.mtcomm.2024.108322
  9. Hiraide, K., Oya, Y., Hirayama, K., Endo, K., Muramatsu, M., " Development of deep learning model for phase separation structure of diblock copolymer based on self-consistent field analysis", Advanced Composite Materials, Vol. 00, pp. 00 1-14, Accepted (2024). https://doi.org/10.1080/09243046.2024.2316421

2023

  1. Yamazaki, Y., Murashima, T., Kouznetsova, V., Muramatsu, M., "A multiscale FEM-MD coupling method for investigation into atomistic-scale deformation mechanisms of nanocrystalline metals under continuum-scale deformation", Physica Scripta, Vol. 99, No.2, pp. 025408 1-20, (2023). https://doi.org/10.1088/1402-4896/ad1c1e
  2. Hiraide, K., Oya, Y., Suzuki, M., Muramatsu, M., "Inverse design of polymer alloys using deep learning based on self-consistent field analysis and finite element analysis", Materials Today Communications, Vol. 37, pp. 107233, 1-14, (2023). https://doi.org/10.1016/j.mtcomm.2023.107233

2022

  1. Endo, K., Matsuda, Y., Tanaka, S., Muramatsu, M., " A phase-field model by an Ising machine and its application to the phase-separation structure of a diblock polymer", Scientific Reports, Vol. 12, pp. 10794, 1-9, (2022). Interviewhttps://doi.org/10.1038/s41598-022-14735-4
  2. Sasaki, K., Hirayama, K., Endo, K., Muramatsu, M., Murayama, M., "Nanoscale Defect Evaluation Framework Combining Real-Time Transmission Electron Microscopy and Integrated Machine Learning-Particle Filter Estimation", Scientific Reports, Vol. 12, pp. 10525, 1-10, (2022).https://doi.org/10.1038/s41598-022-13878-8
  3. Kojima, Y., Hirayama, K., Endo, K., Hiraide, K., Muramatsu, M., "Inverse Estimation Method for Internal Defects Based on Surface Stress of Carbon-Fiber-Reinforced Plastics Using Machine Learning", Advanced Composite Materials, Vol. 31, pp. 617-629, (2022).https://doi.org/10.1080/09243046.2022.2052786

2021

  1. Sato, M., Muramatsu, M., Nishi, S., Kawada, T., Terada, K., "Substitution approach for decoupled two-scale analysis of materially nonlinear composite plates", Computers and Structures, Vol. 255, pp. 106623, 1-21, (2021).https://doi.org/10.1016/j.compstruc.2021.106623
  2. Satake, K., Okada, K., Muramatsu, M., "Phase-field Crack Analysis Using Estimated Transition Zone of Crack by Molecular Dynamics Simulation", AIP Advances, Vol. 11, pp. 065206, 1-10, (2021).https://doi.org/10.1063/5.0054236
  3. Hiraide, K., Hirayama, K., Endo, K., Muramatsu, M., "Application of deep learning to inverse design of phase separation structure in polymer alloy", Computational Materials Science, Vol. 190, pp. 110278, 1-9, (2021).https://doi.org/10.1016/j.commatsci.2021.110278

2020

  1. Muramatsu, M. and Shizawa, K., "Development of Phase-field Model Based on Balance Laws and Thermodynamic Discussion", AIP Advances, Vol. 10, pp. 095325, 1-13, (2021).https://doi.org/10.1063/5.0021881
  2. 車谷麻緒, 加藤匠, 村松眞由, "フェーズフィールド法によるコンクリートのメゾスケールモデルの作成とその数値実験への適用", 日本計算工学会論文集, Vol. 2020, Article ID 20200008 (9 pages), (2020).https://doi.org/10.11421/jsces.2020.20200008
  3. 韓霽珂, 西紳之介, 高田賢治, 村松眞由, 大宮正毅, 小川賢介, 生出佳, 小林卓哉, 村田真伸, 森口周二, 寺田賢二郎, "可変正則化パラメータを用いた phase-field 延性破壊モデル", 日本計算工学会論文集, Vol. 2020, Article ID 20200005 (15 pages), (2020).https://doi.org/10.11421/jsces.2020.20200005

2019

  1. Muramatsu, M. and Shizawa, K., "Discrete Conservation Laws Based on Micropolar Theory Considering Lattice-Scale-Director During Phase Transformation", AIP Advances, Vol. 9, pp. 085211, 1-15, (2019).https://doi.org/10.1063/1.5100774
  2. Yokokawa, H., Suzuki, M., Yoda, M., Suto, T., Tomida, K., Hiwatashi, K., Shimazu, M., Kawakami, A., Sumi, H., Ohmori, M., Ryu, T., Mori, N., Iha, M., Yatsuzuka, S., Yamaji, K., Kishimoto, H., Develos-Bagarinao, K., Shimonosono, T., Sasaki, K., Taniguchi, S., Kawada, T., Muramatsu, M., Terada, K., Eguchi, K., Matsui, T., Iwai, H., Kishimoto, M., Shikazono, N., Mugikura, Y., Yamamoto, T., Yoshikawa, M., Yasumoto, K., Asano, K., Matsuzaki, Y., Sato, K. and Somekawa T., "Achievements of NEDO Durability Projects on SOFC Stacks in the Light of Physicochemical Mechanisms", Fuel Cells, Vol. 19, pp. 311-339, (2019).https://doi.org/10.1002/fuce.201800187

2018

  1. Muramatsu, M., Yashiro, K., Kawada, T. and Terada, K., "Simulation of Ferroelastic Phase Formation Using Phase-field Model", International Journal of Mechanical Sciences, Vols. 146-147, pp. 462-474, (2018).https://doi.org/10.1016/j.ijmecsci.2017.12.027
  2. Muramatsu, M., Sato, M., Terada, K., Watanabe, S., Yashiro, K., Kawada, T., Iguchi, F. and Yokokawa, H., "Shape Deformation Analysis of Anode-supported Solid Oxide Fuel Cell by Electro-chemo-mechanical Simulation", Solid State Ionics, Vol. 319, pp. 194-202, (2018).https://doi.org/10.1016/j.ssi.2018.01.027

2017

  1. Muramatsu, M., Kawada, T. and Terada, T., "A Simulation of Ferroelastic Phase Formation by Using Phase Field Model", Key Engineering Materials, Vol. 725, pp 208-213, (2017).https://doi.org/10.4028/www.scientific.net/KEM.725.208
  2. Yokokawa, H., Kishimoto, H., Yamaji, K., Muramatsu, M., Terada, K., Yashiro, K. and Kawada, T., "Simulation Technology on SOFC Durability with an Emphasis on Conductivity Degradation of ZrO2-base Electrolyte", Journal of Electrochemical Energy Conversion and Storage, Vol. 14, No. 1, 011004 (19 pages), (2017).https://doi.org/10.1115/1.4036038
  3. Muramatsu, M., Yashiro, K., Kawada, T. and Terada, K., "Numerical simulations of non-stationary distributions of electrochemical potentials in SOFC", Engineering Computations, Vol. 34, No. 6, pp. 1956-1988, (2017).https://doi.org/10.1108/EC-08-2016-0311
  4. 佐藤維美，村松眞由，寺田賢二郎，渡辺智，八代圭司，川田達也，横川晴美, "汎用FEM ソフトウェアをプラットフォームとする固体酸化物形燃料電池の非定常電気化学-力学連成解析システムの開発", 日本計算工学会論文集, Vol. 2017, Article ID 20170004 (14 pages), (2017).https://doi.org/10.11421/jsces.2017.20170004
  5. Yokokawa, H., Hori, H., Shigehisa, T., Suzuki, M., Inoue, S., Suto, T., Tomida, K., Shimazu, M., Kawakami, A., Sumi, H., Ohmori, M., Mori, N., Iha, T., Yamaji, K., Kishimoto, H., Develos-Bagarinao, K., Sasaki, K., Taniguchi, S., Kawada, T., Muramatsu, M., Terada, K., Eguchi, K., Matsui, T., Iwai, H., Kishimoto, M., Shikazono, N., Mugikura, Y., Yamamoto, T., Yoshikawa, M., Yasumoto, K., Asano, K., Matsuzaki, Y., Amaha, S. and Somekawa, T., "Recent Achievements of NEDO Durability Project with an Emphasis on Correlation Between Cathode Overpotential and Ohmic Loss", Fuel Cells, Vol. 17, No. 4, pp. 473-497, (2017).https://doi.org/10.1002/fuce.201600186

2016

  1. Terada, K., Hirayama, N., Yamamoto, K., Matsubara, S., Muramatsu, M. and Nishi, S., "Numerical Plate Testing for Linear Two-scale analyses of Composite Plates with In-plane Periodicity", International Journal for Numerical Methods in Engineering, Vol. 105, No. 2, pp. 111-137, (2016).https://doi.org/10.1002/nme.4970
  2. Muramatsu, M., Harada, Y., Suzuki, T. and Niino, H., "Relationship Between Transition of Fracture Mode of Carbon Fiber-Reinforced Plastic and Glass Transition Temperature of Its Resin", Advanced Composite Materials, Vol. 25, No. 2, pp. 143-158, (2016).https://doi.org/10.1080/09243046.2014.986844
  3. Muramatsu, M., Nakasumi, S. and Harada, Y., "Characterization of Defects in Carbon Fiber Reinforced Plastics by Inverse Heat Conduction Analysis Using Transfer Matrix Between Layers", Advanced Composite Materials, Vol. 25, No. 6, pp. 541-555, (2016).https://doi.org/10.1080/09243046.2016.1145892

2015

  1. Muramatsu, M., Suzuki, T. and Nakasone, Y., "Effects of Microstructure on Material Properties of Modified 9Cr-1Mo Steel Subject to Creep-fatigue", Journal of Mechanical Science and Technology, Vol. 29, No. 1, pp. 121-129, (2015).https://doi.org/10.1007/s12206-014-1219-7
  2. Muramatsu, M., Harada, Y., Suzuki, T. and Niino, H., "Infrared Stress Measurements of Thermal Damage to Laser-processed Carbon Fiber Reinforced Plastics", Composites Part A: Applied Science and Manufacturing, Vol. 68, pp. 242-250, (2015).https://doi.org/10.1016/j.compositesa.2014.08.033
  3. Muramatsu, M., Nakasumi, S., Harada, Y. and Suzuki, T., "Application of the Inverse Heat Conduction Analysis to the Evaluation of Defects in Carbon Fiber-reinforced Plastics", Mechanics of Composite Materials, Vol. 50, No. 6, pp. 695-704, (2015).https://doi.org/10.1007/s11029-015-9458-y
  4. Shintaku, Y., Muramatsu, M., Takase, S., Tsutsumi, S. and Terada, K., "Cohesive Crack Model to Reflect Local Chemical Action at Grain and Its Boundaries in Polycrystalline Metals", Quarterly Journal of the Japan Welding Society, Vol. 33, No. 2, pp. 152s-155s, (2015).https://doi.org/10.2207/qjjws.33.152s
  5. Muramatsu, M., Terada, K., Kawada, T., Yashiro, K., Takahashi, K. and Takase, S., "Characterization of Time-varying Macroscopic Electro-chemo-mechanical Behavior of SOFC Subjected to Ni-sintering in Cermet Microstructures", Computational Mechanics, Vol. 56, No. 4, pp. 653-676, (2015).https://doi.org/10.1007/s00466-015-1193-7
  6. 寺田賢二郎, 村松眞由，「結晶塑性モデルによるDP鋼の成形限界特性評価」, 金属，Vol. 85, No. 11, pp. 908-914, (2015).
  7. Muramatsu, M., Kishimoto, H., Yamaji, K., Yahiro, K., Kawada, T. and Terada, K., "Electro-chemical Potential Analysis of Zirconium Based on The Reaction-diffusion Equations of Oxygen Ion and Electron Considering Phase Transformation", ECS Transactions, Vol. 68, No. 1, pp. 2363-2372, (2015).https://doi.org/10.1149/06801.2363ecst

2014

  1. Muramatsu, M., Koyama, M. and Watanabe, I., "Tensile Testing with Cyclic Strain Holding to Analyze Dynamic Recrystallization of Pure Lead", Advances in Materials Science and Engineering, Article ID 498674 (8 pages), (2014).https://doi.org/10.1155/2014/498674
  2. Muramatsu, M., Aoyagi, Y., Tadano, Y. and Shizawa, K., "Phase-field Simulation of Static Recrystallization Considering Nucleation from Subgrains and Nucleus Growth with Incubation Period", Computational Materials Science, Vol. 87, pp. 112-122, (2014).https://doi.org/10.1016/j.commatsci.2014.02.003
  3. Oshima, K., Takaki, T. and Muramatsu, M., "Development of Multi-phase-field Crack Model for Crack Propagation in Polycrystal", International Journal of Computational Materials Science and Engineering, Vol. 3, No. 2, Article ID 1450009 (9 pages), (2014).https://doi.org/10.1142/S2047684114500092
  4. 新宅勇一，村松眞由，堤成一郎，寺田賢二郎，京谷孝史，加藤準治，森口周二, "損傷変数を導入した結合力モデルによる多結晶金属の疲労き裂進展解析", 日本計算工学会論文集, Vol. 2014, Article ID 20140014 (12 pages), (2014).https://doi.org/10.11421/jsces.2014.20140014
  5. Niino, H., Kawaguchi, Y., Sato, T., Narazaki, A., Kurosaki, R., Muramatsu, M., Harada, Y., Anzai, K., Wakabayashi, K., Nagashima, T., Kase, Z., Matsushita, M., Furukawa, K. and Nishino, M., "Laser Cutting of Carbon Fiber Reinforced Thermo-Plastic (CFRTP) by IR Laser Irradiation", Journal of Laser Micro / Nanoengineering, Vol. 9, No.2, pp. 180-186, (2014).https://doi.org/10.1117/12.2003340
  6. Harada, Y., Muramatsu, M., Suzuki, T., Nishino, M. and Niino, H., “Influence of Laser Process on Mechanical Behavior during Cutting of Carbon Fiber Reinforced Plastic Composites”, Materials Science Forum, Vols. 783-786, pp. 1518-1523, (2014).https://doi.org/10.4028/www.scientific.net/MSF.783-786.1518

2012

  1. 村松眞由，青柳吉輝，志澤一之, “再結晶現象における結晶核と母相に対する混相理論としての保存則の定式化”, 日本機械学会論文集A編, Vol. 78, No. 789, pp. 742-757, (2012).https://doi.org/10.1299/kikaia.78.742
  2. 村松眞由，青柳吉輝，志澤一之, “再結晶現象に対するPhase-Fieldモデルの保存則に基づく構築”, 日本機械学会論文集A編, Vol. 78, No. 791, pp. 1065-1078, (2012).https://doi.org/10.1299/kikaia.78.1065

2010

  1. 村松眞由, 味岡秀恭, 青柳吉輝, 只野裕一, 志澤一之, “サブグレインからの核生成と核成長に関する静的再結晶Phase-fieldシミュレーション”, 材料, Vol. 59, No. 11, pp. 853-860, (2010).https://doi.org/10.2472/jsms.59.853
  2. 村松眞由，青柳吉輝，志澤一之, “再結晶現象に対する結晶格子スケールの離散的保存則の定式化”, 日本機械学会論文集A編, Vol. 78, No. 780, pp. 1304-1319, (2011).https://doi.org/10.1299/kikaia.77.1304

2008

  1. Muramatsu, M., Tadano, Y. and Shizawa, K., “A Phase-field Simulation of Nucleation from Subgrain and Grain Growth in Static Recrystallization”, Materials Science Forum, Vols. 584-586, pp. 1045-1050, (2008).https://doi.org/10.4028/www.scientific.net/MSF.584-586.1045